WantJoin Cup Sealing Machine Full Automatic Cup Sealer Machine 90/95mm Electric Cup Sealing Machine Digital Control LCD Panel Cup Sealer for Bubble Milk Tea Coffee (Black)
Fulfilled by Amazon
Product description
【Full Automatic】After placing the cup, the cup sealing machine automatically feeds the cup, automatically rolls the film, automatically seals the cup, automatically ejects, and takes it away directly. The cup sealer machine also has an automatic count, you can check how many cups are sealed each day. Fast cup sealing speed, fully automatic solution to milk tea shop with fewer staff, burst orders, and reject customer loss.
【90 or 95MM Cups, for Lots of Cup Materials】High and short cups are available, can seal any height within 18CM. The cup sealing machine is universal for paper and plastic, and only needs to be equipped with special film for paper and plastic. Plastic cups can be sealed with a variety of materials: PE, PP, PC, and 90-95 calibers can be sealed. The cup sealer machine provides a 90-circle. If you need to seal 90 cups, you can put it in to seal.
【Special Circumstances Handling】The wet mouth can also be sealed, and the speed of sealing machine can be set manually. If the cup is not sealed at one time, it can be manually patched. Free hot drink slap needle, you can tap a small vent on the hot drink film.
【Seal the Cup without Leaking】Accurately set the temperature, 24 hours a day without interruption, 400-600 cups can be sealed per hour. "Dual mode all-in-one machine" is switched manually and automatically with one key to cope with different passenger flows when using the cup sealing machine.
【All-time Technical Guidance】The cup sealing machine has covered all the necessary components. If you need operation videos and troubleshooting guidance videos, as well as one-stop consumables and accessories, and bar equipment problems, please feel free to contact us by email.
All questions
E51/E52 is an electronic eye failure. During the operation, when the film is not installed correctly, the film does not pass through the electronic eye, causing this error code to appear. Another situation is that different parafilms have different recognition sensitivities. Some parafilms require you to fine-tune. We are equipped with a handle for adjusting the electronic eye as a fine-tuning tool.
Si
De 90 a 95mm
You may have incompatible plastics (Cup and film come in different kinds). You can adjust the heat to a higher setting to try and melt it more.
Please check whether there is impurity or sinter on the upper heating plate, and clean it with warm and wet cloth.
Machine temperature is variable, so all cup plastics can be sealed. (I've sealed both PET and PP). Machine has 95mm ring but comes with an adapter that looks like 90mm, but I don't have a 90mm cup to try it with.
Is that the top rim dimension of your cup?
Please wipe with soft cotton cloth to remove dust on the cup sealing machine.
Sealer don’t need to be NSF approve
This is very simple, you only need to adjust the electronic eye. The customer service helped me solve the problem. They are very professional.
The sealing film is not installed correctly, the bayonet of the waste film roller is not aligned with the screw, and it shall be reinstalled according to the schematic diagram on the top of the machine case.
It seals both PET and PP film. Your film should suggest the temperature, as it's the film that melts to the cup. I've had luck sealing both types of plastic with the temperature mine came at, but it's only a few buttons to adjust up/down to get the right seal. Great machine.
You have to special order custom plastic film
Karat C1011 16 oz 500 cc Translucent PP Modern Cups with WYZworks Cup Sealer Film - Bubble Boba Tea Sealing Clear PP type 3275 cups @ 90mm-105mm.
Try to set the holding time little bit longer, but it will make the whole plastic cover looks soft, not a good machine.
It’s said 110v/60Hz. And 350W. Pretty nice machine, the only problem i have is that the machine can’t adjust the lead time on automatically mode.
I don't think so. The 95mm fits the larger ring.
It will be slightly better than a ziplock bag, try filling one of those and see if it pops. The film is not meant to hold a lot of pressure in, and will likely burst if the soda is heavily carbonated or shakes too much, but for a short delivery or low carbonated drink, it would probably be ok.